Specifications

Undercover Systems^® is a modular designed roof system for the underside of decks. This roof/ceiling system consists of individual ceiling panels and integrated guttering that both collect water from the system and also are the support members for the ceiling.

Design

Modular components, custom manufactured to deck configuration.

Fastening

Gutters/supports attached with #8 galvanized screws (on wood) and 3/16 “Tapcon” fasteners (on brick). Gutter bracket supports are installed as required. NO PART OF THIS SYSTEM ATTACHES TO THE UNDERSIDE OF THE DECK. WE MAINTAIN A 4 INCH TO 7 INCH SPACE BETWEEN THE BOTTOM OF THE DECK AND THE TOP OF OUR CEILING. THIS ASSURES THAT THIS PRODUCT WILL NOT CAUSE ANY HARM TO THE DECK ABOVE.

Sealing

Panels are self sealing. Mitered joints and downspout connections are sealed with urethane caulk. The Gutter/support system is sealed to the structure with polyurethane caulk.

Framing

All wood installed is Pressure Treated. Wood is installed with ACQ and MCQ approved, galvanized fasteners.

Slope

1/8” per 12” with a minimum of 2” slope from back to front.

Downspouts

Determined per job; based on square footage and potential for debris entering system.

Cleaning

Exposed surface can be cleaned with mild soap and water as needed. Debris can be cleared from ceiling by raising panel over downspout and removing debris around downspout connection. Gutter can then be rinsed with water to remove any remaining debris. Click here for cleaning instructions.

Access

Ceiling can be disassembled and removed if required.

Substrate

22 gauge, G-90 Galvanized Steel.

Coating

Dura Coat high durability polyester paint system.

Warranty

Limited lifetime leak and paint warranty. Engineering specifications available upon request.

Pricing

Price is based on total area to be covered and complexity of job. Costs will be determined during an onsite visit by USI personnel.